| Download
Avonite Surfaces Specification Guide (.doc)
Download
CSI 1995(.doc)
Download
Master Format 2004(.doc)
The Specification Guideline
is written in Three-Part CSI format.
This Word document can be easily customized for
your own office master system
PRODUCT
IDENTIFICATION
Avonite SurfacesTM
solid surfacing and shaped products.
MANUFACTURER.
7350 Empire Drive
Florence, KY 41042
USA
PRODUCT DESCRIPTION
Composition & Materials:
Avonite SurfacesTM
is a patented, non-porous homogeneous blend of
polyester/acrylic alloys and fillers. This creates
a surfacing material that looks like stone but
cuts like wood. The grain pattern goes all the
way through which allows for three-dimensional
shaping.
Basic
Uses: Because
the material can be worked with conventional
woodworking power tools, the design possibilities
are unlimited. Countertops, wall cladding, furniture,
mouldings, architectural signage and accessories
can be beautifully created with a guarantee
of durability.
Limitations: Many
Avonite Surfaces installations are suitable
for exterior use. However, contact Technical
Services regarding limited approved exterior
applications. Do not use in areas exposed to
sustained temperatures in excess of 375o (CI)
or 260o (CIll). Seaming with joint adhesive
(fusion material) should not be performed when
the ambient temperature of the work area is
below 55o (13o). Sizes: Standard Studio Collection
sheets are available in 36" (915mm) width
by 120" (3050mm) lengths. FoundationsTM
is available in 30" (762mm) width by 144"
(3658mm) lengths. Custom sizes are available
on special order.
Thickness: All
Avonite Surfaces sheets are available in standard
thickness of 1/2" (12.7mm). Foundations
is available in 1/2"(12.7mm) and 1/4"
(6.4mm) thicknesses.
Shaped Products:
Solid surface sinks in kitchen and lavatory
models are available in several standard colors.
Combine with Avonite Surfaces sheets to create
a totally integrated solid surface system. (See
brochure #4081 Sinks, for technical data.)
Colors: A complete
selection of granite, gemstone, and architectural
solids are available. Custom colors can be matched
to order for larger projects. Contact local
Distributor for samples.
Finish: The
factory finish of Avonite Surfaces is a matte
finish approximating 220 grit sandpaper. A satin
sheen or a high polish can be obtained by buffing
with prescribed polishing compounds.
Weight: Avonite
Surfaces sheet stock in 1/2" thickness
weighs approx. 4.0 lbs. per sq. ft. in the Class
I rated materials (CI). Class III sheets weigh
approx. 3.1 lbs. in 1/2" thickness (CIll).
MAINTENANCE
Avonite Surfaces may be easily cleaned using
conventional cleaning agents such as an ammonia
based liquid cleaner (glass cleaner). Dry stains
on a matte finish can be removed with Scotch-Brite
scouring pad by 3M or a mild abrasive cleanser.
Burns or scorches can be removed by sanding with
coarse grit sandpaper followed by finer grit sandpaper.
Follow sanding with a Scotch-Brite 7447 red pad
by 3M (or equivalent) to match finish of sanded
area to surrounding area. A final buffing is required
on polished surfaces. Accidental nicks or chips
can be repaired with special patch kits available
in all standard Avonite Surfaces colors.
STAIN AND CHEMICAL RESISTANCE
The test method used was NEMA LD 3-3.9. No lasting
effect was noted after the prescribed exposure
to 29 common reagents.
SANITARY USE
Avonite Surfaces has been tested and approved
by the National Sanitation Foundation (NSF). Its
inert and non-porous surface will not support
the growth of bacteria and is ideal for food service
and health-care facilities.
CLASS I FLAMMABILITY RATING
The majority of Avonite Surfaces colors have a
Class I flammability rating (CI) making it suitable
for virtually all horizontal and vertical surfaces
in public places. Other Avonite Surfaces decorative
materials are Class III rated and meet all requirements
for residential use and most commercial applications
(see Technical Data).
FABRICATION AND INSTALLATION
Avonite Surfaces should always be fabricated and
installed by accredited fabricators. There are
over 8,000 authorized fabricators worldwide. A
list of qualified craftspeople is available through
local Distributors.
WARRANTY
All Avonite Surfaces products carry a 10 year
written warranty when properly installed by an
authorized fabricator. In addition, most Avonite
Surfaces colors carry a 5 year limited exterior
warranty for signage. For copies of Avonite Surfaces
warranties contact Aristech Acrylics LLC or an
Authorized Distributor.
AVAILABILITY
Avonite Surfaces is available through stocking
distributors in most major cities throughout the
world. Contact Aristech Acrylics LLC for specific
locations.
TECHNICAL SUPPORT AND SERVICES
Contact Aristech Acrylics LLC, in the USA toll-free
at (800) 866-8324 or (505) 864-3800, FAX (505)
864-7790.
|
