|
Download Avonite Surfaces Specification Guide (.doc)
The Specification Guideline is written in
Three-Part CSI format.
This Word document can be easily customized for your own office
master system
PRODUCT IDENTIFICATION
Avonite SurfacesTM solid surfacing and shaped products.
MANUFACTURER.
7350 Empire Drive
Florence, KY 41042
USA
PRODUCT DESCRIPTION
Composition & Materials: Avonite SurfacesTM is a patented, non-porous
homogeneous blend of polyester/acrylic alloys and fillers. This
creates a surfacing material that looks like stone but cuts like
wood. The grain pattern goes all the way through which allows
for three-dimensional shaping.
Basic Uses:
Because the material can be worked with
conventional woodworking power tools, the design possibilities
are unlimited. Countertops, wall cladding, furniture, mouldings,
architectural signage and accessories can be beautifully created
with a guarantee of durability.
Limitations: Many Avonite
Surfaces installations are suitable for
exterior use. However, contact Technical Services regarding
limited approved exterior applications. Do not use in areas
exposed to sustained temperatures in excess of 375o (CI) or 260o
(CIll). Seaming with joint adhesive (fusion material) should not
be performed when the ambient temperature of the work area is
below 55o (13o). Sizes: Standard Studio Collection sheets are
available in 36" (915mm) width by 120" (3050mm)
lengths. FoundationsTM is available in 30" (762mm)
width by 144" (3658mm) lengths.
Custom sizes are available on special order.
Thickness: All
Avonite Surfaces sheets are available in standard
thickness of 1/2" (12.7mm). Foundations is
available in 1/2"(12.7mm) and 1/4" (6.4mm) thicknesses.
Shaped Products: Solid surface sinks in kitchen and lavatory
models are available in several standard colors. Combine with
Avonite Surfaces sheets to create a totally integrated solid surface
system. (See brochure #4081 Sinks, for technical data.)
Colors: A complete selection of granite, gemstone, and
architectural solids are available. Custom colors can be matched
to order for larger projects. Contact local Distributor for
samples.
Finish: The factory finish of
Avonite Surfaces is a matte finish
approximating 220 grit sandpaper. A satin sheen or a high polish
can be obtained by buffing with prescribed polishing compounds.
Weight: Avonite
Surfaces sheet stock in 1/2" thickness weighs approx.
4.0 lbs. per sq. ft. in the Class I rated materials (CI). Class
III sheets weigh approx. 3.1 lbs. in 1/2" thickness (CIll).
MAINTENANCE
Avonite Surfaces may be easily cleaned using conventional
cleaning agents such as an ammonia based liquid cleaner (glass
cleaner). Dry stains on a matte finish can be removed with
Scotch-Brite scouring pad by 3M or a mild abrasive cleanser.
Burns or scorches can be removed by sanding with coarse grit
sandpaper followed by finer grit sandpaper. Follow sanding with
a Scotch-Brite 7447 red pad by 3M (or equivalent) to match
finish of sanded area to surrounding area. A final buffing is
required on polished surfaces. Accidental nicks or chips can be
repaired with special patch kits available in all standard
Avonite Surfaces colors.
STAIN AND CHEMICAL RESISTANCE
The test method used was NEMA LD 3-3.9. No lasting effect was
noted after the prescribed exposure to 29 common reagents.
SANITARY USE
Avonite Surfaces has been tested and approved by the National Sanitation
Foundation (NSF). Its inert and non-porous surface will not
support the growth of bacteria and is ideal for food service and
health-care facilities.
CLASS I FLAMMABILITY RATING
The majority of Avonite Surfaces colors have a Class I flammability
rating (CI) making it suitable for virtually all horizontal and
vertical surfaces in public places. Other Avonite Surfaces decorative
materials are Class III rated and meet all requirements for
residential use and most commercial applications (see Technical
Data).
FABRICATION AND INSTALLATION
Avonite Surfaces should always be fabricated and installed by accredited
fabricators. There are over 8,000 authorized fabricators
worldwide. A list of qualified craftspeople is available through
local Distributors.
WARRANTY
All Avonite Surfaces products carry a 10 year written warranty when
properly installed by an authorized fabricator. In addition,
most Avonite Surfaces colors carry a 5 year limited exterior warranty for
signage. For copies of Avonite Surfaces warranties contact Aristech
Acrylics LLC or an Authorized Distributor.
AVAILABILITY
Avonite Surfaces is available through stocking distributors in most major
cities throughout the world. Contact Aristech Acrylics LLC for
specific locations.
TECHNICAL SUPPORT AND SERVICES
Contact Aristech Acrylics LLC, in the USA toll-free at (800)
866-8324 or (505) 864-3800, FAX (505) 864-7790.
|
