Skip navigation.
Home

Technical and Submittal Documents

Printer-friendly version

Please scroll down to see the sections below and click on the tabs in each section to navigate the Avonite Technical and Submittal Document Library.
ALL SPECIFICATION DOCUMENTS ARE LINKED AT THE BOTTOM OF THE PAGE.


Section 1: Countertops & Sinks
Section 2: Interior Vertical Wall
Section 3: Wet Wall Panel System

AttachmentSize
102113_-_Toilet_Compartments_-10-27-08w.doc54 KB
123600-Countertops-10-27-08.doc51 KB
Avonite_General_Specification_Guidelines.doc170.5 KB
Avonite_spec_Long_Form_II_.doc766 KB

Tech - Countertops & Sinks


Print and Review the Avonite Care and Maintenance Guidelines

Matte Finish

Cleaning 
A sponge, soap and water will clean most stains. For more stubborn stains use a green Scotch Brite pad and an abrasive cleanser. Periodically go over the entire matte surface with a dry green Scotch Brite pad to return the original finish.
 
Scratches 
To remove scratches, start sanding with 240 grit paper and then clean with an abrasive cleanser and a green Scotch Brite pad.
 
Avonite Sinks
Use the Matte Finish cleaning and scratch removal procedures above. To keep sink color bright, clean occasionally with liquid bleach and water. Fill the sink 1/4 full with water, add 1 to 2 cups of bleach, wipe the sides of the sink and let stand for 15 minutes. Then drain the sink and rinse.
 

Satin Finish

Cleaning
Soap and water will clean most stains. For stubborn stains use a white Scotch Brite pad and a non-abrasive cleanser, such as Soft Scrub.
 
Scratches
To remove scratches, start by sanding with 400 grit paper followed by 600 grit paper. Then clean the area with Soft Scrub and a white Scotch Brite pad. You may choose to spray a light coat of Protect All to enhance the luster.
 

High Gloss

Cleaning
Soap and water will remove most stains. Use a polishing compound like 3M Perfect-It and a soft cloth to remove more stubborn stains.
 
Scratches
To remove scratches from a high gloss finish, start sanding with 400 grit paper. The surface must then be machine polished back to its original finish. Advise customer to contact the AVONITE Surfaces Fabricator if they do not own or have access to this equipment.
 

Helpful Hints

  • Always use a hot pad or trivet under hot pots or heat producing appliances.
  • Always use a cutting board.
  • Never stand on your counters.
  • Avoid harsh chemicals such as drain cleaners and paint removers.
  • For high gloss counters place felt protectors on the bottom of pottery or other hard objects.
  • Avoid sliding hard objects across these glossy surfaces.
  • Always run cool water when pouring boiling water into Avonite Surfaces sinks.
 Videos

Tech - Interior Vertical Wall

Product File Revision All terms
Avonite Surfaces Foundations PDF file download C Acrylic, Acrystone, Avonite Surfaces Foundations, Mineral Filled Acrylic, Polymethylmethacrylate, Polymethylmethacrylate
Avonite Surfaces Studio Collection PDF file download C A3, Avonite, Avonite Surfaces Studio Collection, C1, G3, K1, K3, M3, Polyester
Avonite Surfaces Ultra-Bond G PDF file download C Avonite Surfaces Ultra-Bond G, Mixture, Solid Surface Adhesive (Part A – in the bigger tube)
Avonite Surfaces Inlay Resin PDF file download C Avonite Surfaces Inlay Resin, Unsaturated Polyester Resin
Catalyst MEKP-9 PDF file download B Catalyst MEKP-9, Organic Peroxide Catalyst
Avonite Surfaces Powder Filler PDF file download C Avonite Surfaces Powder Filler, Polyester, Polyester granules

Printer-friendly versionSend to friend